Estudo da substituição de aço convencional por aço de baixa liga e alta resistência (BLAR) em módulo estrutural

Abstract

Two kinds of steel were studied, conventional steel ZAR 230 (a standard for high strength galvanizing) and microalloyed steel ZSTE 380 (according to the regulation SEW 093). The study of its mechanical properties aimed to replace the steel for microalloyed steel in bodywork s tubular structure for collective transport vehicles of passengers. The conventional steel has been used for the bodywork industry for years, and the microalloyed steel is basically used in specific structures, those who require good mechanical properties and mass reduction. The analysis of the feasibility for the replacement of conventional steel for microalloyed steel in a complete structural model requires a series of tests. Lab tests were done to evaluate their main mechanical and chemical properties. The tests of the structural nodes and the structural behaviour when subjected to a load provided information to be used in the finite elements method software to do structural calculation and to calibrate the results. The structural modules were prepared according to the regulations ECE R66-00 (European market) and CONTRAN 811/96 (Brazilian market) and these modules were tested exhaustively to achieve the best displacement between the two materials that were analysed comparatively. The validation of the tubular structure was obtained using the software Ansys Workbench 9.0 and the production of the representative structure of a bodywork tested according the regulation CONTRAN 811/96.