Buscar
Itens para a visualização no momento 61-70 of 195
Revulcanização de rejeito industrial de copolímero de butadieno e estireno (SBR)
(2014-05-05)
The objective of this work was to develope and characterize SBR industrial scraps vulcanizable formulations with technological applications. Firstly, SBR scraps were collected in accordance with the standard NBR 10007. ...
Estudo da substituição de aço convencional por aço de baixa liga e alta resistência (BLAR) em módulo estrutural
(2014-05-05)
Two kinds of steel were studied, conventional steel ZAR 230 (a standard for high strength galvanizing) and microalloyed steel ZSTE 380 (according to the regulation SEW 093). The study of its mechanical properties aimed to ...
Incorporação de polietileno pós-consumo em espumas de polietileno de baixa densidade
(2014-05-05)
The use of waste polyethylene (p-PE) in low-density polyethylene (LDPE) foams that have azodicarbonamide (ACA) as blowing agent is the topic of this paper. It characterizes used polymers, and p-PE is made of a mixture of ...
Tratamento de lixiviado através de filtro anaeróbio associado a membrana de microfiltração
(2014-05-12)
Nowadays, the use of membrane bioreactors (MBRs) has been researched in many places of the world to treat different kinds of wastewater. The use of MBRs has advantages over other processes when the main focus is on the ...
Análise modal de materiais compósitos
(2014-05-14)
A modal analysis procedure for composites is presented in this work. Procedures employed to aim this objective can be divided into three groups: mass-balance, image analysis and point-counting. The mass-balance methods are ...
Estudo de variáveis de composição e processo para controle da compressibilidade
(2014-05-14)
Brake pads for automotive brake systems represent one of the most complex composite materials since they contain many components with widely varying physical and chemical properties. This multiphase nature is necessary to ...
Morfologia e propriedades térmicas de compósitos de HDPE/EVA com POSS
(2014-05-22)
In this study composites with a polymeric matrix comprising a blend of high density polyethylene (HDPE) and the copolymer ethylene vinyl acetate (EVA), and with polyhedral oligomeric silsesquioxane (POSS) as the nanoclay, ...
Desenvolvimento e caracterização de compósitos sanduíche para isolamento térmico
(2014-05-29)
A sandwich panel consists essentially of two face sheets and may even have metal reinforcements and a core formed, usually by a cellular polymer. The faces of this type of panel may be joined by a structural adhesive or ...
Estudo de aplicação de areia descartada de fundição como material alternativo para camada de cobertura de aterro de resíduos
(2014-05-29)
Advances in environmental issues related to materials science have been done due to the possibility of the use of alternative materials replacing conventional ones with similar characteristics. The Brazilian Foundry has ...
Propriedades estruturais e mecânicas do carbeto de vanádio obtido por magnetron sputtering reativo
(2014-05-22)
The use of hard coatings has many applications in the metal-mechanic industry due to the improvement of surface properties such as high hardness and wear and corrosion resistance. One of the most important techniques for ...