Avaliação mecânica e tribológica de compósitos alumina-nióbio obtidos via sinterização por plasma pulsado
Visualizar/ Abrir
Data
2017-07-05Autor
Bandeira, Aline Luísa
Orientador
Farias, Maria Cristina More
Metadata
Mostrar registro completoResumo
This work presents a study of the mechanical and tribological properties of niobium-reinforced alumina composites obtained by the spark plasma sintering (SPS) technique. Alumina and niobium powders were characterized regarding the size distribution and morphology of particles by laser diffraction and scanning electron microscopy, respectively. These particulates materials were mixed and simultaneously pressed and sintered by SPS with a uniaxial pressure of 50 MPa at 1400oC. The microstructure and crystalline phases of sintered materials were determined by scanning electron microscopy and X-ray diffraction, respectively. Mechanical properties of the samples related to the stiffness, hardness and fracture toughness were determined by means of the instrumented indentation test and the Vickers indention test. For the tribological study of the ceramic materials, sliding wear tests were performed using the experimental design statistics technique. A factorial design at two levels was used in order to evaluate the main and the interaction effects of three factors – Nb concentration, normal load and counterbody – on friction and wear responses. Empirical relationships between the responses and the interest factors were obtained by means of the factorial design at three levels. Sliding wear tests were conducted in dry environment at room temperature using a ball-on-disc configuration, three levels of normal load (5 N, 10 N and 15 N), ceramic disks with three compositions (alumina, alumina-15%Nb e alumina-25%Nb), metallic (AISI 52100 steel) and ceramic (Al2O3) balls as well. The tribological behavior of the materials was evaluated with regard to friction coefficient, wear coefficient and wear mechanisms. The results showed that composites exhibited an increase in mechanical resistance because they had higher fracture toughness values than the monolithic alumina. In addition, the brittleness index that correlates the stiffness, hardness and the fracture toughness was lower for the composite with a higher niobium content. Statistical results indicated that the main and interactions effects involving niobium concentration and counterbody were significant. The friction coeficiente for the composites was slightly lower for the steel counterbody. When sliding against the steel counterbody composites exhibited a wear resistance two orders of magnitude higher than that of the monolithic alumina and specific wear coefficient values characteristic of the mild wear regime. The higher wear resistance of composites was related to the tribofilm formation over worn surfaces, due to material transfer from the counterbody. Monolithic alumina showed a higher wear in relation to the composites, due to brittle fracture, mostly when sliding against the Al2O3 counterbody at higher loads. The good strength of matrix/reinforce interface contributed to increase the fracture toughness of composites, as well as to prevent the pull out of niobium particles from alumina matrix and to increase the sliding wear resistance of alumina – niobium composites.